BUILT-IN BOX
built-in box, cover white

with magnetic clamp, WxHxD 120 x 310 x 60 mm, (if required pipe lead-through to break-off, adjustable depth from 60 to 95 mm) minimum height for installation 200 mm

BUILT-IN BOX
built-in box with cover

ready to decorate and tile, WxHxD 450 x 200 x 90 mm (if required pipe lead-through to break off, adjustable depth from 90 to 140 mm), minimum height for installation 200 mm

BUILT-IN BOX
built-in box with frame and door

(powder coated white) WxHxD 450 x 200 x 90 mm (if required pipe lead-through to break off, adjustable depth from 90 to 140 mm), minimum height for installation 200 mm

PIPE THREADER STANDARD
for heating pipe ø 8 mm

steel spring for screwing into the pipe end for better guidance of the pipe when threading into the comb panels; l = 230 mm

PIPE THREADER SPECIAL
for heating pipe ø 10 mm

steel spring for screwing into the pipe ends for an ideal guidance of the pipe when threading into the comb panels; l = 255 mm

TWISTING TOOL

for the twisting of bending clips and thus forming an interlocking connection among the comb panels

TURNING ROLL

special tool for the fitting of 180 ° bends when inserting the heating pipe

PIPE SHEARS

for synthetic pipe, for cutting-off without burrs and pipe deformation, for pipe diameter 4 to 22 mm

SPARE CUTTERS FOR PIPE SHEARS

for synthetic pipe, for cutting-off without burrs and pipe deformation, for pipe diameter 4 to 22 mm

PIPE CLIPPER

for synthetic pipe, for cutting-off without burrs and pipe deformation, for pipe diameter 4 to 12 mm

SPARE BLADE FOR PIPE CLIPPER

for synthetic pipe, for cutting-off without burrs and pipe deformation, for pipe diameter 4 to 12 mm

SHEET METAL SHEARS

for the accurate building situation-dependent cutting of the comb panels and the cut-out of panel parts when fitting of pipe bends

TOOL SET for heating pipe ø 8 mm

consiting of 5x turning roll, 1x pipe threader, 1x twisting tool

TOOL SET for heating pipe ø 10 mm

consisting of 5x turning roll, 1x pipe threader, 1x twisting tool